Main Features

It has high bonding strength, excellent physical properties such as non-sagging, tear/scratch/wear resistance. After curing, it is super anti-mildew, anti-bacterial, stain resistant, waterproof, moisture-proof, colorful, durable, smooth as porcelain, hard as diamond, bright as crystal, easy to clean, etc. The construction is very simple and convenient.

Physical Parameters

Construction Method

1 Clean the dirt on the ceramic surface, and remove the dust and glue residue from joints, as well as any items such as plastic spacers.

2 Stick masking tape on both sides of the joints before use, or apply oily wax on both sides of the tile gap.

3 Unscrew the tube cap, install the nozzle, and cut the nozzle into the required size according to the size of the joint, preferably 1mm larger than the joint. And install the cartridge tube inside the gun.

4 Discard the first 20-30cm of the grout to ensure the material is well mixed.

5 Use a caulking gun to evenly into the tile joints, first horizontally and then vertically.

6 Use a pressing plate to finish the grout according to the required size.

7 Following the curing time guide lines 

0-12℃, 8-12 hours

12-24℃, 6-8 hours

24-36℃above, 4-6 hours.

8 Carefully remove the waste with your hands or use the scraper provided inside Perflex tool kit.

Caution

1 Waste removal time is from 4-24 hours along with the temperature from 45℃ to 5℃. For example, 4 hours at 35℃, 6 hours at 25℃, 12 hours at 15℃, & 24 hours at 5℃. Lower temperatures require more curing time. 

2 The storage of sealant should not be less than 5℃. 

3 Construction temperature is suitable in the range of 15-30℃. Too low temperature will affect the curing time and strength. 

4 Impurities, dust, grease, clear water and other substances shall not be allowed during construction. 

5 Do not touch or trample until the sealant is completely cured.