This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by clicking here.By continuing to use this site without changing your settings, you are agreeing to our use of cookies.

Home / Products / Tile Grout / EPOXY TILE GROUT

  • a2
  • a2

Glitter Colored Epoxy Tile Grout Cartridge - EPOXPRO P20A dual cylinder colored epoxy tile grout for tile joint filling, made of epoxy resin, curing agent and high-grade pigment by advanced epoxy formulation. It is better than traditional epoxy cementitious grout and cement grout in application way and effect, it is smooth as ceramic after cured, good hardness, wear-resistant, stain-resistant, anti-mould, easy to clean and easy to grout by caulking gun.

Model Number:EPOXPRO P-20

Component:Epoxy resin & hardener

Certificate:France A+, CE, Rohs


Shelf life:24 months

Color:Regular & matt

Application:Tile joint filling and beautifying

Construction:Caulked by caulking gun

Main Features

It has high bonding strength, excellent physical properties such as non-sagging, tear/scratch/wear resistance. After curing, it is super anti-mildew, anti-bacterial, stain resistance, waterproof, moisture-proof, colorful, durable, smooth as porcelain, hard as diamond, bright as crystal, easy to clean, etc. The construction is very simple and convenient.

Physical Parameters

Testing Item

Resin A

Hardener B


Semi-fluid liquid

Thixotropic paste

Blend ratio (by volume)


Odor grade


Chromatic aberration △E


Working time25℃*min


Original Curing


HardnessShore D


Colloidal fluidity after blending

Thixotropic fluid

Bonding Strength/MPa


Wear Resistance (750 g.500 r)/g


Sagging after blending

No sagging

Tensile Shear Strength/MPa

Standard condition


High/low temperature switch.


Water absorbent 25℃24 hour%


Waterproof / 24h

No change

Chemical Resistance / 2h

No change

Stain Resistance (Vinegar, soy, oil)/ 1h

No change

Testing condition: 21-25℃,relative humidity 45-55%. Constructed by caulking gun.

Construction Method

1 Clean the dirt on the ceramic surface, and remove the dust and glue residue from joints, as well as any items such as plastic spacers.

2 Stick masking tape on both sides of the joints before use, or apply oily wax on both sides of the tile gap.

3 Unscrew the tube cap, install the nozzle, and cut the nozzle into the required size according to the size of the joint, preferably 1mm larger than the joint. And install the cartridge tube inside the gun.

4 Discard the first 20-30cm of the grout to ensure the material is well mixed.

5 Use a caulking gun to evenly into the tile joints, first horizontally and then vertically.

6 Use a pressing plate to finish the grout according to the required size.

7 Following the curing time guide lines 

0-12℃, 8-12 hours

12-24℃, 6-8 hours

24-36℃above, 4-6 hours.

8 Carefully remove the waste with your hands or use the scraper provided inside Perflex tool kit.


1 Waste removal time is from 4-24 hours along with the temperature from 45℃ to 5℃. For example, 4 hours at 35℃, 6 hours at 25℃, 12 hours at 15℃, & 24 hours at 5℃. Lower temperatures require more curing time. 

2 The storage of sealant should not be less than 5℃. 

3 Construction temperature is suitable in the range of 15-30℃. Too low temperature will affect the curing time and strength. 

4 Impurities, dust, grease, clear water and other substances shall not be allowed during construction. 

5 Do not touch or trample until the sealant is completely cured.

Color Selection


Perflex pick Tools

Perflex pick Tools
Use it with our product…
And make your project easier

Favorable Effect By Product

Product Information Download

Material Safety Data SheetDownload

Technical Data SheetDownload

Test ReportDownload

More Relative Products

Leave your inquiry


Email Address

Contact number


tel+86 183 9099 2093

email[email protected]




Glitter Colored Epoxy Tile Grout Cartridge - EPOXPRO P20

Glitter Colored Epoxy Tile Grout Cartridge - EPOXPRO P20

Model Number:EPOXPRO P-20

Component:Epoxy resin & hardener

Application:Tile joint filling and beautifying

Construction:Caulked by caulking gun

Leave a Message
We will call you back soon!