This site uses and sets "cookies" on your computer to help make this website better. You can learn more about these cookies and general information about how to change your cookie settings by clicking here.By continuing to use this site without changing your settings, you are agreeing to our use of cookies.

Home / Products / Tile Grout / POLYASPARTIC TILE GROUT

  • POLYPRO P30
  • 202203141706225816
  • POLYPRO P30
  • POLYPRO P30
  • 202203141706225816
  • POLYPRO P30

Colored Polyaspartic Tile Grout Cartridge - POLYPRO P30A best QUV resistance and non yellowing tile grout for over 50 years, that made of polyaspartic resin, isocyanate hardener. It is a semi-fluid liquid, packed into two-component plastic cartridge, easily operated by automatic caulking gun. It’s 100% solid content, zero VOC, non-toxic materials that can be cured under low temperature above -25℃

Model Number:POLYPRO P-30

Component:Polyaspartic resin & Isocyanate Hardener

Certificate:France A+, CE, Rohs

Volume:400ml

Shelf life:16 months

Color:Regular & Sanded matt

Application:Tile joint filling and beautifying

Construction:Caulked by caulking gun

Main Features

Polyaspartic Tile Grout P-30 is super weather resistant. The grout will not be yellowing and chalking at outdoor. It has high bonding strength, excellent physical properties such as being non-sagging and tear/scratch/wear resistance. After curing, it is super anti-mildew, anti-bacterial, stain resistant, waterproof, moisture-proof, colorful, durable, smooth as porcelain, hard as diamond, bright as crystal, easy to clean, etc. The construction is very simple and convenient.


Physical Parameters

Testing Item

Resin A

Hardener B

Appearance

Thixotropic paste

Semi-fluid liquid

Blend ratio (by volume)

A:B=1:1

Odor grade

2

Chromatic aberration △E

≤1.5

Working time25℃*min

20±5min

Original Curing

25℃*4H±1

HardnessShore D

72

Colloidal fluidity after blending

Thixotropic fluid

Adhesion (pull off test)(7d)

6MPa

Abrasion Resistance (1000 g/500 r)

6mg

Sagging after blending

No sagging

Tensile Shear Strength/MPa

Standard condition

≥5.0

High/low temperature switch

≥3.0

Water absorbent 25℃24 hour(%)

0.2

Yellowing Resistance (168h)/

△E*=0.4

Waterproof / 24h

No change

Chemical Resistance / 2h

No change

Stain Resistance (Vinegar, soy, oil)/ 1h

No change

Testing condition: 21-25℃,relative humidity 45-55%. Constructed by caulking gun.


Construction Method

1 Clean the dirt on the ceramic surface, and remove the dust and glue residue from joints, as well as any items such as plastic spacers.

2 Stick masking tape on both sides of the joints before use, or apply oily wax on both sides of the tile gap.

3 Unscrew the tube cap, install the nozzle, and cut the nozzle into the required size according to the size of the joint, preferably 1mm larger than the joint. And install the cartridge tube inside the gun.

4 Discard the first 20-30cm of the grout to ensure the material is well mixed.

5 Use a caulking gun to evenly into the tile joints, first horizontally and then vertically.

6 Use a pressing plate to finish the grout according to the required size.

7 Wait two to four hours at 25-35°C ambient temperature for curing and drying. Then use a scraper to remove excess grout.


Caution

1 Waste removal time is from 4-24 hours along with the temperature from 45℃ to 5℃. For example, 4 hours at 35℃, 6 hours at 25℃, 12 hours at 15℃, & 24 hours at 5℃. Lower temperatures require more curing time. 

2 The storage of sealant should not be less than 5℃. 

3 Construction temperature is suitable in the range of 15-30℃. Too low temperature will affect the curing time and strength. 

4 Impurities, dust, grease, clear water and other substances shall not be allowed during construction. 

5 Do not touch or trample until the sealant is completely cured.



Color Selection

HIDE THE FULL COLOR SELECTION

Perflex pick Tools

Perflex pick Tools
Use it with our product…
And make your project easier

Favorable Effect By Product

Product Information Download

Material Safety Data SheetDownload

Technical Data SheetDownload

Test ReportDownload

More Relative Products

Leave your inquiry

Name

Email Address

Contact number

Description

tel+86 183 9099 2093

email[email protected]

whatsapp

#

contact

Colored Polyaspartic Tile Grout Cartridge - POLYPRO P30

Colored Polyaspartic Tile Grout Cartridge - POLYPRO P30

Model Number:POLYPRO P-30

Component:Polyaspartic resin & Isocyanate Hardener

Application:Tile joint filling and beautifying


Leave a Message
We will call you back soon!