Main Features

● Fast curing speed, facade, top surface continuous spraying does not flow hanging.

● Insensitive to moisture and temperature, with good thermal stability.

● 100% solid content, no VOC, no pollution, environmentally friendly.

● Excellent physical properties, and the concrete substrate adhesion is good.

● Coating without seam, excellent waterproof performance.

● High elongation, resistance to hot and cold alternating without cracking.

● Good weather resistance, no pulverization, no discoloration.

Physical Properties at 23℃

The above parameters are sprayed with GUSMER HXP 3 host & AP spray gun under laboratory conditions，fixed at room temperature and tested after 7 days.

Construction Specification & Measures

● Drying time (25℃) : shall dry within 1 minute and walking intensity shall be achieved in 10 minutes.

● Thickness : 1~20mm (depending on user requirements)

● The shortest recoat interval: unlimited time; the longest recoat interval: less than 3 hours.

Substrate treatment: old concrete should be putty to repair holes and cracks. Concrete shall be completely dry (new made concrete needs to be hydration, dry for 28 days), the surface to remove loose impurities, spraying 1~2, supporting the cement closed primer, primer curing and then spraying construction.

● The construction method must use the high temperature and high pressure impact mixing equipment specified by the company. We do not guaranty the quality if user apply unverified equipment by us.