Saiti ino inoshandisa uye kuseta "makuki" pakombuta yako kubatsira kuti webhusaiti ino ive nani. Unogona kudzidza zvakawanda pamusoro pemakuki aya uye ruzivo rwakakwana nezve machinjiro ecookie yako nekudzvanya pano.Nekuramba uchishandisa saiti ino usingashandure marongero ako, urikubvuma kushandisa kwedu makuki.

Musha / Products / Mvura isina mvura / PRAY POLYUREA

  • Polyurea Spray-pa Bedliner Coating SP1200
  • SP1000.
  • 产品图
  • Polyurea Spray-pa Bedliner Coating SP1200
  • SP1000.
  • 产品图

Polyurea Spray-pa Bedliner Coating SP1200SP1200 polyurea spray-on explosion-proof elastomer is a two-component coating composed of high-performance resin and hardener. It can form a protective film on the surface of the concrete or steel structure, so as to improve the fire resistance and explosion-proof performance of the protective coating, to prevent explosion, fire and other accidents to damage the substrate. SP1200 has excellent mechanical properties, like good flexibility, good tensile strength, tear strength and elongation, wear resistance and impact resistance, strong anti-corrosion performance, good fire prevention performance, excellent waterproof performance and good heat insulation performance.

Muenzaniso Nhamba: SP1200

Chikamu: polyurea resin uye hardener

Chitupa: France A+, CE, Rohs, ISO9001

Design use:explosion-proof and impact resistance, mainly used in military vehicles, national defense engineering and construction, drones, helicopters, submarines, warships and other military fields, as well as some civil fields such as engineering machinery, construction, and vehicles

Appearance: Part A is clear liquid, Part B is colored liquid.

Nguva yekuchengetedza: Mwedzi gumi nemaviri (Mushure menguva yekuchengetedza, inogona kuongororwa zvichienderana nezvinhu zvakatsanangurwa muchiyero chechigadzirwa. Inogona kushandiswa kana ikasangana nezvinodiwa zvehunyanzvi.)

Kuchengetedza tembiricha: 15 ℃-30 ℃

Packaging specification: Part A: 220KG/drum / Part B: 210KG

Iyo yekurongedza inogona kugadzirwa zvinoenderana nezvinodiwa.

Product Features

● Absorb the impact energy to slow down the impact force of bullets, single sheets, etc.

● Effective protection against the splashing of metal debris.

● VOC zero emission, environmental protection and no pollution.

● Fast curing speed, continuous spraying does not flow hanging, high construction efficiency.

● Excellent adhesion on metals, composite materials, concrete and other substrates.

● Good low-temperature flexibility.

● Excellent corrosion resistance and chemical resistance.


1717667110466848.png

1717655868956794.png(1)


Panyama Paramende

panzePart A is clear liquid, Part B is colored liquidAdhesion force(steel)/ MPa≥10
Solid zvinyorwa≥98%Kuoma/Shore D50 ± 5
Chikamu1.05 ~ 1.3Abrasion resistance(750g/500r)/mg≦ 3
Gel time/ s5-8Impact resistance/kgm2
purojekitiindekisiArtificial climate aging (2000h)
table dry time/ s8-1030% sulphuric acid (90d)
Tensile simba/Mpa25 ± 330% hydrochloric acid (90d)
Elongation at break/ %200 ± 5030% sodium hydroxide (90d)
Tear strength/N/mm140 ± 10Saturated sodium chloride (90d)

● Excellent ○ Good


Kutsanangurwa Kwekuvaka & Matanho

1 Material preparation: if the temperature is lower than 15℃, components A and B should be heated and insulated, and the control viscosity should be less than 2000 cps.

2 Equipment debugging: the high temperature and high pressure collision mixing equipment designated by the company must be used during the construction.

3 Before spraying, check A and B hydraulic materials (2500 ~ 3000 psi). If the hydraulic difference is more than 500 Psi, we must unload the pressure and then restart it for debugging.

4 The metal substrate should be treated to 2.5 grade and coated with special primer. Before construction, ensure the spraying surface is clean, dry, dust free and shiel without spraying; other substrate should be treated according to the actual situation.

5 During the construction, the spray distance control is 50~100cm, and the second shot covers about 40%~60% of the first shot, and the travel speed effectively controls the flow hang.

6 Within 24 hours after the completion of the construction, the heavy object rolling should be avoided.

7 The construction should avoid heavy fog, rain and snow, high temperature and other bad weather.

8 The staff wear good work clothes, gloves, gas masks and other labor protection supplies.

9 The temperature of substrate should be more than 3℃ higher than the dew point.

10 Mix component B thoroughly until fully uniform before construction.

11 The unused materials should be filled with nitrogen and kept sealed.

12 The system is 100% solid content, without including any dilution agent.

13 In the confined space of the construction, good ventilation should be ensured.

Ruvara Sarudzo

VIGAI RUSARUDZO RWAKAZARA

Perflex sarudza Zvishandiso

Perflex sarudza Zvishandiso
Ishandise nechigadzirwa chedu…
Uye ita kuti chirongwa chako chive nyore

Favorable Effect NeChigadzirwa

More Relative Products

Siya kubvunza kwako

zita

Chikero chetsamba yemumhepo

Nhamba yekubatanidza

tsananguro

tel+ 86 183 9099 2093

e[email inodzivirirwa]

whatsapp

#

udza mashoko

Polyurea Spray-pa Bedliner Coating SP1200

Polyurea Spray-pa Bedliner Coating SP1200

Model Number:SP1200

Chinhu:polyurea resin uye yakaoma

Kushandiswa kwekugadzira:explosion-proof and impact resistance, mainly used in military vehicles, national defense engineering and construction, drones, helicopters, submarines, warships and other military fields, as well as some civil fields such as engineering machinery, construction, and vehicles

Siya Mharidzo
Tichakufonera nekukurumidza!