دا سایټ ستاسو په کمپیوټر کې "کوکیز" کاروي او تنظیموي ترڅو د دې ویب پاڼې په ښه کولو کې مرسته وکړي. تاسو کولی شئ د دې کوکیز او عمومي معلوماتو په اړه نور معلومات ترلاسه کړئ چې څنګه خپل کوکیز تنظیمات بدل کړئ دلته کلیک کولو سره. د دې سایټ کارولو ته دوام ورکولو سره ستاسو د ترتیباتو بدلولو پرته، تاسو زموږ د کوکیز کارولو سره موافق یاست.

کور / محصولات / د پنروک جھلی / پولیوریا سپری

  • د پولیوریا سپری پر بیډلینر کوټینګ SP1200
  • SP1000.
  • 产品图
  • د پولیوریا سپری پر بیډلینر کوټینګ SP1200
  • SP1000.
  • 产品图

د پولیوریا سپری پر بیډلینر کوټینګ SP1200SP1200 polyurea spray-on explosion-proof elastomer is a two-component coating composed of high-performance resin and hardener. It can form a protective film on the surface of the concrete or steel structure, so as to improve the fire resistance and explosion-proof performance of the protective coating, to prevent explosion, fire and other accidents to damage the substrate. SP1200 has excellent mechanical properties, like good flexibility, good tensile strength, tear strength and elongation, wear resistance and impact resistance, strong anti-corrosion performance, good fire prevention performance, excellent waterproof performance and good heat insulation performance.

د ماډل شمیره: SP1200

اجزا: پولیوریریا رال او سختونکی

سند: د فرانسې A+، CE، Rohs، ISO9001

Design use:explosion-proof and impact resistance, mainly used in military vehicles, national defense engineering and construction, drones, helicopters, submarines, warships and other military fields, as well as some civil fields such as engineering machinery, construction, and vehicles

Appearance: Part A is clear liquid, Part B is colored liquid.

د ذخیره کولو وخت: 6 میاشتې (د ذخیره کولو مودې وروسته، دا د محصول په معیار کې مشخص شوي توکي سره سم معاینه کیدی شي. دا لاهم کارول کیدی شي که دا تخنیکي اړتیاوې پوره کړي.)

د ذخیره کولو تودوخه: 15 ℃ - 30 ℃

Packaging specification: Part A: 220KG/drum / Part B: 210KG

بسته بندي د اړتیاو سره سم تنظیم کیدی شي.

د تولیداتو ځانګړتیاوی

Absorb the impact energy to slow down the impact force of bullets, single sheets, etc.

Effective protection against the splashing of metal debris.

VOC zero emission, environmental protection and no pollution.

Fast curing speed, continuous spraying does not flow hanging, high construction efficiency.

Excellent adhesion on metals, composite materials, concrete and other substrates.

Good low-temperature flexibility.

Excellent corrosion resistance and chemical resistance.


1717667110466848.png

1717655868956794.png(1)


فزیکي پیرامیټرې

خارجېPart A is clear liquid, Part B is colored liquidAdhesion force(steel)/ MPa≥10
جامد مینځپانګه≥XNXX٪سختۍ/ساحل D50 ± 5
تناسب1.05 ~ 1.3Abrasion resistance(750g/500r)/mg给 3
Gel time/ s5-8Impact resistance/kgm2
د پروژې دډېرځليزېArtificial climate aging (2000h)o
table dry time/ s8-1030% sulphuric acid (90d)o
تناسلي ځواک/Mpa25 ± 330% hydrochloric acid (90d)
Elongation at break/ %200 ± 5030% sodium hydroxide (90d)o
Tear strength/N/mm140 ± 10Saturated sodium chloride (90d)o

● Excellent ○ Good


د ساختمان مشخصات او اقدامات

1 Material preparation: if the temperature is lower than 15℃, components A and B should be heated and insulated, and the control viscosity should be less than 2000 cps.

2 Equipment debugging: the high temperature and high pressure collision mixing equipment designated by the company must be used during the construction.

3 Before spraying, check A and B hydraulic materials (2500 ~ 3000 psi). If the hydraulic difference is more than 500 Psi, we must unload the pressure and then restart it for debugging.

4 The metal substrate should be treated to 2.5 grade and coated with special primer. Before construction, ensure the spraying surface is clean, dry, dust free and shiel without spraying; other substrate should be treated according to the actual situation.

5 During the construction, the spray distance control is 50~100cm, and the second shot covers about 40%~60% of the first shot, and the travel speed effectively controls the flow hang.

6 Within 24 hours after the completion of the construction, the heavy object rolling should be avoided.

7 The construction should avoid heavy fog, rain and snow, high temperature and other bad weather.

8 The staff wear good work clothes, gloves, gas masks and other labor protection supplies.

9 The temperature of substrate should be more than 3℃ higher than the dew point.

10 Mix component B thoroughly until fully uniform before construction.

11 The unused materials should be filled with nitrogen and kept sealed.

12 The system is 100% solid content, without including any dilution agent.

13 In the confined space of the construction, good ventilation should be ensured.

د رنګ ټاکنه

د بشپړ رنګ انتخاب پټ کړئ

Perflex غوره وسیلې

Perflex غوره وسیلې
زموږ د محصول سره یې وکاروئ ...
او خپله پروژه اسانه کړئ

د محصول لخوا د خوښې وړ اغیزه

نور اړونده محصولات

خپل تحقیقات پریږدئ

نوم

بریښنالیک

د اړیکې شمیره

Description

ډول+ 86 183 9099 2093

ایمیل[ایمیل خوندي شوی]

whatsapp

#

تماس

د پولیوریا سپری پر بیډلینر کوټینګ SP1200

د پولیوریا سپری پر بیډلینر کوټینګ SP1200

د ماډل شمیره:سپ 1200

جز :polyurea رال او hardener

ډیزاین کارول:explosion-proof and impact resistance, mainly used in military vehicles, national defense engineering and construction, drones, helicopters, submarines, warships and other military fields, as well as some civil fields such as engineering machinery, construction, and vehicles

یو پیغام پریږده
موږ به ژر تاسو ته زنګ ووهئ!