Saịtị a na-eji ma na-edozi “kuki” na kọmputa gị iji nyere aka mee ka webụsaịtị a ka mma. Ị nwere ike ịmụtakwu banyere kuki ndị a na ozi izugbe banyere otu esi agbanwe ntọala kuki gị site na ịpị ebe a. Site na ịga n'ihu na-eji saịtị a na-agbanweghị ntọala gị, ị na-ekwenye na anyị na-eji kuki.

/Lọ / ngwaahịa / Sealant&nrapado / Ọnụ ego nke CRYSTAL EPOXY RESIN

  • 微 信 图片 _20221216163356
  • 840
  • 微 信 图片 _20221216155917
  • 微 信 图片 _20221216163356
  • 840
  • 微 信 图片 _20221216155917

Crystal Epoxy ResinPerflex P-128 is high permeability epoxy pouring adhesive cured at room temperature. It has the advantages of good transparency, low viscosity, environmental protection and mild curing process. After curing, it has high transparency, good hardness and excellent yellowing resistance.

Model Number:P-128

Akụkụ: resin epoxy

Asambodo: France A+, CE, Rohs, ISO9001

Volume: loaded with 5kg in 5L plastic barrel

Ndụ nchekwa: ọnwa 24

Appearance:clear liquid

Application:Insulation sealing of wood crafts, decorative surface gum dropping, furniture and mould filling, especially suitable for filling with high thickness requirements such as river tables, tea trays and wooden furniture.

Main Akụkụ:

It is a high permeability epoxy pouring adhesive, cured at room temperature. It has the advantages of good transparency, low viscosity, clean taste, environmental protection and mild curing process. After curing, it has high transparency, good hardness and excellent yellowing resistance.


ngwa:

Perflex crystal mmanụ epoxy can be used for the insulation sealing of wood crafts, decorative surface gum dropping, furniture and mould filling, and other electronic parts. It is especially suitable for filling with high thickness requirements such as river tables, tea trays and wooden furniture.


Nka na ụzụ kwa:


Base resin

Ihe siri ike

anya:

doro anya mmiri mmiri

doro anya mmiri mmiri

Nnukwu ike

1.15 ± 0.01

0.96± 0.01

ebe mgbari

> 140 ℃

> 140 ℃

Viscosity (25*cps)

480-580

35-50

Mix proportion (weight ratio)

A:B=3:1

Curing time(100g*25*min)

48min

Condition of cure

60~70℃×2h or 80℃×1h

Flexural strength(unit: kg/mm2)

14

Tensile strength(unit: kg/mm2)

7

Elongation(unit:%)

3.6

Hardness(Shore D)

75

Water absorption 25/24h(unit:%)

<0.1


Lebara Anya:

1-Keep the bonding surface clean and dry, free of dust and grease.

2-Ensure to mix the 2-component adhesive by weight ratio, and stir well. Adjust the amount of mixture based on operation speed and ambient temperature.

3-When the relative humidity reaches over 80%, it is recommended to cure by adding heat rather than at room temperature.

4-If permitted, vacuum degassing before applying produces better results.

5-Excess adhesive can be cleaned off with a rag dipped with small amount of alcohol or acetone before fully curing.

6-Close the lid of the container well after use to minimize moisture entering into the container causing quality issue.

Nhọrọ Agba

Zoo nhọrọ agba zuru oke

Perflex họrọ Ngwa

Perflex họrọ Ngwa
Jiri ya na ngwaahịa anyị…
Ma mee ka ọrụ gị dị mfe

Mmetụta Dị Mma Site na Ngwaahịa

Ngwaahịa ndị ọzọ

Hapụ ajụjụ gị

aha

Adreesị ozi ịntanetị

Nọmba kọntaktị

Description

waya+ 86 183 9099 2093

email[email protected]

whatsapp

#

kọntaktị

Crystal Epoxy Resin

Crystal Epoxy Resin

Nọmba nlereanya:P-128

akụrụngwa:mmanụ epoxy

Hapụ ozi
Anyị ga-akpọghachi gị ngwa ngwa!