Wannan rukunin yanar gizon yana amfani da saita "kukis" akan kwamfutarka don taimakawa inganta wannan gidan yanar gizon. Kuna iya ƙarin koyo game da waɗannan kukis da cikakkun bayanai game da yadda ake canza saitunan kuki ta danna nan. Ta ci gaba da amfani da wannan rukunin yanar gizon ba tare da canza saitunanku ba, kun yarda da amfani da kukis ɗinmu.

Gida / Products / Sealant & Adhesive / CRYSTAL EPOXY RESIN

  • 微 信 图片 _20221216163356
  • 840
  • 微 信 图片 _20221216155917
  • 微 信 图片 _20221216163356
  • 840
  • 微 信 图片 _20221216155917

Crystal Epoxy ResinPerflex P-128 babban permeability epoxy zubo manne da warke a dakin zafin jiki. Yana da abũbuwan amfãni daga mai kyau nuna gaskiya, low danko, muhalli kare da m curing tsari. Bayan warkewa, yana da babban nuna gaskiya, mai kyau taurin da kyakkyawan juriya na rawaya.

Lambar samfur: P-128

Bangaren: epoxy resin

Takaddun shaida: Faransa A+, CE, Rohs, ISO9001

Volume: Load da 5kg a 5L filastik ganga

Shelf rayuwa: 24 watanni

Bayyanar: ruwa mai tsabta

Aikace-aikacen: Rufe hatimin fasahar katako, faduwa saman kayan ado, kayan daki da kayan kwalliya, musamman dacewa da cika buƙatun kauri kamar teburin kogi, tiren shayi da kayan katako.

Main Features:

It is a high permeability epoxy pouring adhesive, cured at room temperature. It has the advantages of good transparency, low viscosity, clean taste, environmental protection and mild curing process. After curing, it has high transparency, good hardness and excellent yellowing resistance.


Aikace-aikace:

Perflex crystal resin epoxy can be used for the insulation sealing of wood crafts, decorative surface gum dropping, furniture and mould filling, and other electronic parts. It is especially suitable for filling with high thickness requirements such as river tables, tea trays and wooden furniture.


Fasaha sigogi:


Base resin

Hardener

Appearance:

bayyananne ruwa

bayyananne ruwa

Musamman nauyi

1.15 ± 0.01

0.96± 0.01

Matsalar Flash

> 140 ℃

> 140 ℃

Dangantaka (25*cps)

480-580

35-50

Mix proportion (weight ratio)

A:B=3:1

Curing time(100g*25*min)

48min

Condition of cure

60~70℃×2h or 80℃×1h

Flexural strength(unit: kg/mm2)

14

Tensile strength(unit: kg/mm2)

7

Elongation(unit:%)

3.6

Hardness(Shore D)

75

Water absorption 25/24h(unit:%)

<0.1


M:

1-Keep the bonding surface clean and dry, free of dust and grease.

2-Ensure to mix the 2-component adhesive by weight ratio, and stir well. Adjust the amount of mixture based on operation speed and ambient temperature.

3-When the relative humidity reaches over 80%, it is recommended to cure by adding heat rather than at room temperature.

4-If permitted, vacuum degassing before applying produces better results.

5-Excess adhesive can be cleaned off with a rag dipped with small amount of alcohol or acetone before fully curing.

6-Close the lid of the container well after use to minimize moisture entering into the container causing quality issue.

Zabin Launi

BOYE CIKAKKEN ZABIN LAUNIYA

Perflex pick Tools

Perflex pick Tools
Yi amfani da samfuranmu…
Kuma ku sauƙaƙa aikin ku

Ingantacciyar Tasiri Ta Samfura

Ƙarin Kayayyakin Dangi

Bar tambayar ku

sunan

Adireshin i-mel

Lambar lambar sadarwa

description

E-mail: [email kariya]

tel+ 86 183 9099 2093

email[email kariya]

whatsapp

#

lamba

Crystal Epoxy Resin

Crystal Epoxy Resin

Lambar Samfura:P-128

bangaren:resin epoxy

Barin Sako
Za mu sake kiran ku nan ba da jimawa ba!