Bidh an làrach seo a’ cleachdadh agus a’ suidheachadh “briosgaidean” air a’ choimpiutair agad gus an làrach-lìn seo a dhèanamh nas fheàrr. Faodaidh tu barrachd ionnsachadh mu na briosgaidean seo agus fiosrachadh coitcheann mu mar a dh’ atharraicheas tu na roghainnean cookie agad le bhith a’ briogadh an seo.Le bhith a’ leantainn ort a’ cleachdadh na làraich seo gun a bhith ag atharrachadh do roghainnean, tha thu ag aontachadh gun cleachd sinn briosgaidean.

Dachaigh / Dachaigh Products / Grout leacach / EPOXY TILE GROUT

  • EPOXPRO P20
  • a2
  • EPOXPRO P20
  • EPOXPRO P20
  • a2
  • EPOXPRO P20

Cartridge grout leac epoxy le dath glitter - EPOXPRO P20Grout leacag epoxy le dath siolandair dùbailte airson lìonadh còmhla leacach, air a dhèanamh le roisinn epoxy, àidseant ciùraigidh agus dath àrd-ìre le cruthachadh adhartach epoxy. Tha e nas fheàrr na grout cementitious epoxy traidiseanta agus grout saimeant ann an dòigh tagraidh agus buaidh, tha e rèidh mar ceirmeag às deidh leigheas, cruas math, caitheamh-dhìonach, stain-resistant, anti-mould, furasta a ghlanadh agus furasta a bhleith le bhith a’ crathadh gunna .

Àireamh Modail: EPOXPRO P-20

Co-phàirt: roisinn epoxy & inneal-cruaidh

Teisteanas: An Fhraing A +, CE, Rohs

Meud: 400 ml

Sgeilp beatha: 24 mìosan

Dath: cunbhalach & matt

Iarrtas: Co-lìonadh leacag agus sgeadachadh

Togail: Air a chuartachadh le gunna cailc

prìomh fheartan

It has high bonding strength, excellent physical properties such as non-sagging, tear/scratch/wear resistance. After curing, it is super anti-mildew, anti-bacterial, stain resistance, waterproof, moisture-proof, colorful, durable, smooth as porcelain, hard as diamond, bright as crystal, easy to clean, etc. The construction is very simple and convenient.


Paramadairean fiosaigeach

Nì deuchainn

Resin A

Hardener B

coltas

Semi-fluid liquid

Thixotropic paste

Blend ratio (by volume)

A: B = 1: 1

Odor grade

≤3

Chromatic aberration △E

≤1.5

Ùine obrach(25℃*min)

35±5m

Original Curing

35℃*6H±1

cruas(Cladach D.)

60

Colloidal fluidity after blending

Thixotropic fluid

Bonding Strength/MPa

≥5.0

Wear Resistance (750 g.500 r)/g

≤0.030

Sagging after blending

Gun sagging

Tensile Shear Strength/MPa

Standard condition

≥5.0

High/low temperature switch.

≥3.0

Water absorbent 25℃24 hour(%)

<0.2

Waterproof / 24h

Chan eil atharrachadh

Chemical Resistance / 2h

Chan eil atharrachadh

Stain Resistance (Vinegar, soy, oil)/ 1h

Chan eil atharrachadh

Testing condition: 21-25℃,relative humidity 45-55%. Constructed by caulking gun.


Modh togail

1 Clean the dirt on the ceramic surface, and remove the dust and glue residue from joints, as well as any items such as plastic spacers.

2 Stick masking tape on both sides of the joints before use, or apply oily wax on both sides of the tile gap.

3 Unscrew the tube cap, install the nozzle, and cut the nozzle into the required size according to the size of the joint, preferably 1mm larger than the joint. And install the cartridge tube inside the gun.

4 Discard the first 20-30cm of the grout to ensure the material is well mixed.

5 Use a caulking gun to evenly into the tile joints, first horizontally and then vertically.

6 Use a pressing plate to finish the grout according to the required size.

7 Following the curing time guide lines 

0-12℃, 8-12 hours

12-24℃, 6-8 hours

24-36℃above, 4-6 hours.

8 Carefully remove the waste with your hands or use the scraper provided inside Perflex tool kit.


Rabhaidh

1 Waste removal time is from 4-24 hours along with the temperature from 45℃ to 5℃. For example, 4 hours at 35℃, 6 hours at 25℃, 12 hours at 15℃, & 24 hours at 5℃. Lower temperatures require more curing time. 

2 The storage of sealant should not be less than 5℃. 

3 Construction temperature is suitable in the range of 15-30℃. Too low temperature will affect the curing time and strength. 

4 Impurities, dust, grease, clear water and other substances shall not be allowed during construction. 

5 Do not touch or trample until the sealant is completely cured.



Taghadh dath

Falaich an taghadh làn dath

Innealan Tagh Perflex

Innealan Tagh Perflex
Cleachd e leis an toradh againn…
Agus dèan do phròiseact nas fhasa

Buaidh fàbharach a rèir toradh

Fiosrachadh bathar a luchdadh a-nuas

Duilleag dàta sàbhailteachd sàbhailteachdLuchdaich a-nuas

Duilleag dàta teignigeachLuchdaich a-nuas

Aithisg TestLuchdaich a-nuas

Barrachd thoraidhean co-cheangailte

Fàg an rannsachadh agad

Ainm

Seòladh puist-d

Àireamh conaltraidh

Tuairisgeul

leithid+ 86 183 9099 2093

post-d[post-d fo dhìon]

whatsapp

#

cuiribh fios gu

Cartridge grout leac epoxy le dath glitter - EPOXPRO P20

Cartridge grout leac epoxy le dath glitter - EPOXPRO P20

Modail àireamh:EPOXPRO P-20

Com-pàirt :Resin epoxy & inneal-cruaidh

Iarrtas :Co-lìonadh leacag agus maiseachadh

Togail:Air a chuartachadh le gunna cailc


Fàg teachdaireachd
Cuiridh sinn fios air ais thu a dh ’aithghearr!