ይህ ጣቢያ ይህን ድህረ ገጽ የተሻለ ለማድረግ በኮምፒውተርዎ ላይ "ኩኪዎችን" ይጠቀማል እና ያዘጋጃል። እዚህ ጠቅ በማድረግ ስለእነዚህ ኩኪዎች እና አጠቃላይ መረጃ እንዴት የኩኪ ቅንጅቶችን መቀየር እንደሚችሉ ማወቅ ይችላሉ።የእርስዎን ቅንብሮች ሳይቀይሩ ይህን ጣቢያ መጠቀምዎን በመቀጠል፣በእኛ የኩኪዎች አጠቃቀም ተስማምተዋል።

ቤት / ምርቶች / ንጣፍ ግሩቭ / ፖሊአስፓርቲክ ሰድር GROUT

  • ፖሊፕሮ ፒ 30
  • 202203141706225816
  • ፖሊፕሮ ፒ 30
  • ፖሊፕሮ ፒ 30
  • 202203141706225816
  • ፖሊፕሮ ፒ 30

ባለቀለም ፖሊያስፓርቲክ ንጣፍ ግሩት ካርትሬጅ - POLYPRO P30ከ50 አመታት በላይ የፈጀው ምርጥ የQUV መቋቋም እና ቢጫ ቀለም የሌለው ንጣፍ ከፖሊአስፓርቲክ ሙጫ፣ isocyanate hardener የተሰራ። ከፊል-ፈሳሽ ፈሳሽ ነው፣ ወደ ባለ ሁለት አካል የፕላስቲክ ካርቶጅ የታሸገ፣ በቀላሉ በአውቶማቲክ ጠመንጃ የሚንቀሳቀስ። 100% ጠንካራ ይዘት ነው፣ ዜሮ VOC፣ በዝቅተኛ የሙቀት መጠን ከ -25℃ በላይ ሊፈወሱ የሚችሉ መርዛማ ያልሆኑ ቁሶች

የሞዴል ቁጥር: POLYPRO P-30

አካል፡ ፖሊያስፓርቲክ ሙጫ እና ኢሶሲያኔት ማድረቂያ

የምስክር ወረቀት፡ ፈረንሳይ A+፣ CE፣ Rohs

መጠን: 400ml

የመደርደሪያ ሕይወት: 16 ወራት

ቀለም: መደበኛ እና አሸዋማ ንጣፍ

መተግበሪያ: የሰድር መገጣጠሚያ መሙላት እና ማስዋብ

ግንባታ: በሽጉጥ ጠመንጃ

ዋና ዋና ባህሪያት

ፖሊፓስቲክ Tile Grout P-30 is super weather resistant. The grout will not be yellowing and chalking at outdoor. It has high bonding strength, excellent physical properties such as being non-sagging and tear/scratch/wear resistance. After curing, it is super anti-mildew, anti-bacterial, stain resistant, waterproof, moisture-proof, colorful, durable, smooth as porcelain, hard as diamond, bright as crystal, easy to clean, etc. The construction is very simple and convenient.


የአካል መለኪያዎች

የሙከራ ንጥል

Resin A

Hardener B

መልክ

Thixotropic paste

Semi-fluid liquid

Blend ratio (by volume)

A:B=1:1

Odor grade

2

Chromatic aberration △E

≤1.5

የስራ ሰዓት(25℃*min)

20±5min

Original Curing

25℃*4H±1

ግትርነት(የባህር ዳርቻ ዲ)

72

Colloidal fluidity after blending

Thixotropic fluid

Adhesion (pull off test)(7d)

6MPa

አብርሳዮን Resistance (1000 ግ/500 r)

6mg

Sagging after blending

መጨናነቅ የለም።

Tensile Shear Strength/MPa

Standard condition

≥5.0

High/low temperature switch

≥3.0

Water absorbent 25℃24 hour(%)

<0.2

Yellowing Resistance (168h)/

△E= 0.4

Waterproof / 24h

ምንም ለውጥ የለም

Chemical Resistance / 2h

ምንም ለውጥ የለም

Stain Resistance (Vinegar, soy, oil)/ 1h

ምንም ለውጥ የለም

Testing condition: 21-25℃,relative humidity 45-55%. Constructed by caulking gun.


የግንባታ ዘዴ

1 Clean the dirt on the ceramic surface, and remove the dust and glue residue from joints, as well as any items such as plastic spacers.

2 Stick masking tape on both sides of the joints before use, or apply oily wax on both sides of the tile gap.

3 Unscrew the tube cap, install the nozzle, and cut the nozzle into the required size according to the size of the joint, preferably 1mm larger than the joint. And install the cartridge tube inside the gun.

4 Discard the first 20-30cm of the grout to ensure the material is well mixed.

5 Use a caulking gun to evenly into the tile joints, first horizontally and then vertically.

6 Use a pressing plate to finish the grout according to the required size.

7 Wait two to four hours at 25-35°C ambient temperature for curing and drying. Then use a scraper to remove excess grout.


ጥንቃቄ

1 Waste removal time is from 4-24 hours along with the temperature from 45℃ to 5℃. For example, 4 hours at 35℃, 6 hours at 25℃, 12 hours at 15℃, & 24 hours at 5℃. Lower temperatures require more curing time. 

2 The storage of sealant should not be less than 5℃. 

3 Construction temperature is suitable in the range of 15-30℃. Too low temperature will affect the curing time and strength. 

4 Impurities, dust, grease, clear water and other substances shall not be allowed during construction. 

5 Do not touch or trample until the sealant is completely cured.



የቀለም ምርጫ

የሙሉውን የቀለም ምርጫ ደብቅ

Perflex ይምረጡ መሳሪያዎች

Perflex ይምረጡ መሳሪያዎች
ከኛ ምርት ጋር ተጠቀም…
እና ፕሮጀክትዎን ቀላል ያድርጉት

በምርት ጥሩ ውጤት

የምርት መረጃ ማውረድ

የቁስ ደህንነት ውሂብ ሉህአውርድ

የቴክኒክ መረጃ ሉህአውርድ

የሙከራ ሪፖርትአውርድ

ተጨማሪ አንጻራዊ ምርቶች

ጥያቄዎን ይተዉት።

ስም

የ ኢሜል አድራሻ

የእውቂያ ቁጥር

መግለጫ

እንደዚህ+86 183 9099 2093

ኢሜይል[ኢሜል የተጠበቀ]

WhatsApp

#

እውቂያ

ባለቀለም ፖሊያስፓርቲክ ንጣፍ ግሩት ካርትሬጅ - POLYPRO P30

ባለቀለም ፖሊያስፓርቲክ ንጣፍ ግሩት ካርትሬጅ - POLYPRO P30

ሞዴል ቁጥር:ፖሊፕሮ P-30

ክፍል :ፖሊአስፓርቲክ ሙጫ እና ኢሶሲያኔት ማድረቂያ

ማመልከቻ :የሰድር መገጣጠሚያ መሙላት እና ማስዋብ


መልዕክትዎን ይተዉ
በቅርቡ እንደውልሃለን!