Method of tile grouting on the wall

1. Before wall construction, ensure that the ceramic tile has no empty spaces, and clean up the debris in the ceramic tile gap with a cloth or a fine brush. Don’t start grouting until it’s dry; 

2. When grouting, it should be constructed from top to bottom, first horizontal and then vertical; 

3. When grouting, the thickness should be even and try not to overflow; 

4. When grouting for the internal and external corners, the steel ball should be used to make the grout more three-dimensional. 

Method of tile grouting on the floor

1. Use professional gap cleaning tool to clear the lime in floor gap. Some places cannot be cleaned thoroughly and must use awl to clean it again. Use a small brush then to sweep the dust away.

2. Use the caulking gun to squeeze tile grout along the gaps. Be careful of the pressing strength and avoid uneven grouting.

3.  After grouting, it is necessary to use the pressing ball to press evenly in time, which is like pulling out a line from the grouted area, so that it will be easy to remove the residue when shoveling. 

4. In addition to straight gap, there will be T-joint and multilateral gap. They need to be pressed for several times with the pressing ball. 5. For cross joints, after the two intersecting joints are pressed, press the cross joints only once again.

6.  After tile grouting is finished completely, you can start cleaning residue after 6-24 hours. During this period, remember to keep the room well ventilated.